Now there are a lot of amusement equipment, but the more equipment, people pay great attention to its safety. Some operators have used equipment for a long time, but there is no problem, but there are some operators' equipment. The time is not very long, and it is obviously not working properly. Why is this? This is the key point we want to talk about today, the maintenance of the equipment, the equipment should be good, the maintenance can not be less, the following small series will summarize the knowledge of maintenance!

　　1. It is necessary to check and repair the amusement equipment in time to avoid the problem early. However, many amusement equipments are mechanical equipment. As long as it is eroded by rain, snow or other bad weather, it is very prone to abnormalities. Therefore, it is necessary for operators to do a good job of avoiding rain and snow. On the other hand, if there is water on the amusement equipment, then it is necessary to remove the accumulated water during leisure time. For some equipment that has not been used for a long time, it should be stored in a place where ventilation is not humid to avoid problems. It is both to prevent problems from exposure and to prevent vandalism. To deworm the device.

　　2. Our amusement equipment is mostly made of plastic, some of which are also made of fiberglass or metal. When cleaning plastics and FRP, we can use soapy water, or disinfectant detergent, as well as bleaching powder or dilute the infusion solution. When washing, use a soft cloth or a soft brush to scrub, and finally rinse with water. There are rusted metal parts that can be removed with a brush and wiped with a dry cloth when finished. Use the sun to smash, this time spray paint. After some drying, it can be sprayed again to protect it. After the paint is completely dry, wash it again and do the disinfection work. When cleaning circuit components, be sure to make sure that the power is off, turn the power on after drying.

　　3. When performing maintenance on some high-altitude equipment, be sure to check the connection parts firmly; if the circuit electrical appliances or common parts are damaged, all parts can not have spikes, so there is a big hidden danger in safety. If serious safety problems are found during maintenance, stop the operation immediately to avoid a safety accident.

　　The above is some points to pay attention to in the maintenance of amusement equipment, so remember to write it down!